Camera Cages & Shoulder Camera Rig for Professional Video

  The correct use of three-axis camera stabilizer should pay attention to these aspects: 1. The correct posture 2. The right balance 3. Save physical 4. Annex options.

  Correct posture

  Shooting when using the three-axis camera stabilizer, if you carelessly walk, the picture will be up and down beating. If you are still a novice use of camera stabilizer, this situation will happen often. Even if you are walking, you do not realize it. In fact, every step you take, will cause the body to move up and down. Many people like to hold the camera stabilizer at the hip buttocks, because that is the most comfortable. If your camera stabilizer supports turning the camera over, mention the camera flush with the line of sight so you can raise the camera at least 4 feet without any movement. Many non-video clips, there are many people do not lift the camera stabilizer between the waist and shoulder, sometimes very useful, but if the entire film is completed in this location shooting, it is a bit too casual.

  It's important to be sure that the height of the camera and the story you want to express are on the main line. Almost everyone has to deal with it. Holding something so heavy in front of me and holding it even for hours. If you have a back injury, but has been bent over his chest, is equal to always let the shoulder force. This is very bad for the body, so be careful to control the hard back. Keep your shoulders and back straight, shoulders and buttocks straight up in a line, to avoid excessive force. Of course, if you want to control the camera stabilizer in the chest, you also want to make it as close as possible to the body, to avoid excessive loss of physical fitness.

  Often I see a lot of people think the balance has been adjusted, but once the camera stabilizer is turned off, the camera loses its balance. This means that the right balance has not been set and the motor has to laboriously correct the machine to a balanced position. Even with the camera stabilizer, but if not properly balanced, the motor will still work to waste electricity, which is also a waste of space to be corrected. Since 20% of the force has been used to correct the balance, 20% of the force is lost during the actual operation of the balance.
  camera stabilizer
  camera stabilizer
  video camera stabilizer
  gimbal camera stabilizer
  gimbal stabilizer
  camera gimbal
  dslr stabilizer
  dslr camera stabilizer

  tripod head
  Gimbal Head
  tripod gimbal head
  tripod camera
  best tripod
  tripod stand